Holography, Optics and Photonics

Removal of Mid Spatial-Frequency Features in Mirror Segments

Guoyu Yu et al. — Fri, 03 Aug 2012 08:06:52 PDT

BoX grinding technology has been adopted in our E-ELT segment process. The mid-spatial frequency features generated can be removed by several 'smoothing' processes. We have reported here a novel method that can smooth these features whilst avoiding edge down-turn. This process can be scaled up to E-ELT segment fabrication time-scale. It has been experimentally demonstrated that the surface quality is good enough for subsequent Zeeko form correction technology to achieve form specifications.

Misfit of rigid tools and interferometer subapertures on off-axis aspheric mirror segments

Ci Song et al. — Fri, 03 Aug 2012 07:42:15 PDT

Rigid tools can confer advantages at certain stages of manufacturing off-axis mirror segments, but the misfit due to surface asphericity and asymmetry poses constraints on their application. Types of misfit are classified and, using least squares, the best-fit tool forms with different distances from the pole of the parent asphere are calculated. The outer mirror segment for the European extremely large telescope is taken as a case-study, assuming a rigid tool size of 150 mm. A simple independent approximation validates the calculation. A close parallel is wavefront misfit in subaperture interferometry, which is also considered.

Holographic Optical Elements Recorded in Silver Halide Sensitized Gelatin Emulsions. Part 2. Reflection Holographic Optical Elements

J M. Kim et al. — Tue, 23 Feb 2010 08:14:17 PST

Silver halide sensitized gelatin (SHSG) holograms are similar to holograms recorded in dichromated gelatin (DCG), the main recording material for holographic optical elements (HOEs). The drawback of DCG is its low energetic sensitivity and limited spectral response. Silver halide materials can be processed in such a way that the final hologram will have properties like a DCG hologram. Recently this technique has become more interesting since the introduction of new ultra-fine-grain silver halide (AgHal) emulsions. In particular, high spatial-frequency fringes associated with HOEs of the reflection type are difficult to construct when SHSG processing methods are employed. Therefore an optimized processing technique for reflection HOEs recorded in the new AgHal materials is introduced. Diffraction efficiencies over 90% can be obtained repeatably for reflection diffraction gratings. Understanding the importance of a selective hardening process has made it possible to obtain results similar to conventional DCG processing. The main advantage of the SHSG process is that high-sensitivity recording can be performed with laser wavelengths anywhere within the visible spectrum. This simplifies the manufacturing of high-quality, large-format HOEs, also including high-quality display holograms of the reflection type in both monochrome and full color.

Holographic Optical Elements Recorded in Silver Halide Sensitized Gelatin Emulsions. Part I. Transmission Holographic Optical Elements

J M. Kim et al. — Thu, 07 Jan 2010 09:14:16 PST

Silver halide sensitized gelatin (SHSG) holograms are similar to holograms recorded in dichromated gelatin (DCG), the main recording material for holographic optical elements (HOE’s). The drawback of DCG is its low sensitivity and limited spectral response. Silver halide materials can be processed in such a way that the final hologram will have properties like a DCG hologram. Recently this technique has become more interesting since the introduction of new ultra-high-resolution silver halide emulsions. An optimized processing technique for transmission HOE’s recorded in these materials is introduced. Diffraction efficiencies over 90% can be obtained for transmissive diffraction gratings. Understanding the importance of the selective hardening process has made it possible to obtain results similar to conventional DCG processing. The main advantage of the SHSG process is that high-sensitivity recording can be performed with laser wavelengths anywhere within the visible spectrum. This simplifies the manufacturing of high-quality, large-format HOE’s.